Troubleshooting
Are you encountering errors with HP Officejet 8022 printer? If so, go with our steps to bring it to the
normal state. If the issue exists, then get it resolved over the call. Our
professionals will fix it instantly within the time-frame.
HP Officejet 8022
network connection settings
In the first place, examine the compatibility between the
Officejet printer and the network.
Next, ensure the chosen network is stable and reliable. If
there any fluctuation in signal strength, then try to replace the router.
Sequentially, refresh the network settings to enhance the
network flow.
Now, uninstall any previous driver on your computer.
Then, navigate to the printer site. And then search for
compact HP Officejet 8022 printer driver.
Eventually, download the driver. Once the download is
complete, initiate the installation.
At the time of installation, choose the connection type and
configure the setup.
If HP Officejet 8022 printer
network connection fails
There may be many reasons for a poor network connection.
Firstly, connect the printer with the Network, before you
install it.
Secondly, switch off the router and leave it idle for two
minutes.
Now, close all the programs on the computer and turn off the
computer.
Eventually, remove the USB
cable or Ethernet cables from the computer.
After a few minutes, turn on the computer. And also make
sure the printer is in a ready state.
At this point, move to the network and sharing settings on
your computer.
Next, select the change adapter settings.
Here, in this section, determine whether the network
connection is enabled.
If not enabled, then click on it and activate it.
Disable Firewall
Printer Firmware
Some times the firewall will block the Officejet 8022 printer installation. To disable the firewall
settings temporarily while installing the HP Officejet
8022 driver.
In the first place, download and install the Print and scan
the doctor.
Next, open the scan doctor and move onto the Network
section.
At this point, hit on the Troubleshooting Firewalls option.
Here, it will show the active firewalls.
Sequentially, select the firewall and disable it.
Eventually, follow the same procedure to deactivate the active
firewalls.
At last, install the software package on the computer.
Uninstall Driver
and Software
In the first place, power on the HP Officejet 8022 printer.
Now, discard the cables from the Officejet printer.
At this point, click on the start icon to turn on the
Printer device.
Next, select the program settings. Then select the Devices
and Printer section.
Here, in this folder, find the printer icon.
Right-click on the printer icon and choose the uninstall
option.
Wait till the driver gets completely uninstalled.
Eventually, remove all the setup files from the computer.
Sequentially, refresh the settings to refresh the network
connections.
HP Officejet 8022
printer software reinstall
In the first place, discard the driver files from HP Officejet 8022 Printer driver download.
Next, move to the official site. Then enter the printer
model number in the Find tab.
Now, the browser will show the list of the driver on the
screen.
Then, select the HP Officejet
8022 drivers and click on the download option.
Note: Choose the respective full feature driver from the
webpage.
Eventually, wait till the driver gets fully downloaded.
Sequentially, initiate the driver setup file to install the HP Officejet 8022 software.
Consequently, move on with HP Officejet 8022 user manual for easy installation.
Finally, ensure the proper installation by printing the
documents.
