HP Officejet Pro 9012 Network Problem Fix
HP Troubleshooting
Are you facing issues with printer functionalities? Don’t
worry these sections will guide you with all the printer related queries. We
offer simple Troubleshooting steps that can fix the issues instantly and
permanently. Speak with our expert for recovering your HP Officejet Pro 9012 printer.
HP Officejet Pro 9012
network connection settings
Make use of the Smart app for connecting the printer to
your wireless network. Let the connection be from a computer, Android mobile
device or Apple mobile device.
Firstly, connect the HP Officejet
pro 9012 printer and device to the same network.
Now, install the Smart app on your device.
Once the installation is complete, open the APP.
Eventually, accept the terms and conditions.
Next, click on the “+” sign and tap on the ADD printer.
Then tap on the Set Up and Add a New Printer option.
Proceed with the instructions on the screen for setting the
printer on the wireless network.
If HP Officejet Pro 9012
printer network connection fails
The first step to getting rid of the network connectivity
issue is turning OFF the printer.
If the printer is in sleep mode, then it is well and good.
Secondly, discard the power cables from the printer.
Now reconnect the power cord connection and run the quality
check.
Next, accomplish legitimate network connection through wired
or wireless setup.
Here, for the connection setup, go through the HP Officejet Pro 9012 user manual.
If using a wireless network, make sure the signal strength
of the wireless router is stable.
For the USB setup, the cable should be of sufficient length
and proper condition.
Again, check the settings that align with the network
connection.
Disable Firewall
Printer Firmware
To determine whether the firewall is causing the problem,
use print and scan doctor. This will temporarily hinder the firewall software.
Print and scan doctor is extremely beneficial for disabling the firewall
software. It will automatically fix the firewall which blocks the driver
installation.
As the first step, install the print and scan doctor on your
system.
Once you install, the print and scan window will open on the
screen.
Now, choose the Network menu. Then select the
troubleshooting firewall software.
Here, find out all the software options which are in enabled
status.
Disable the checkmark one after the other to disable the
firewall settings.
Uninstall Driver
and Software
You can uninstall the driver and Software in two ways. You
can use the uninstaller or easy start.
Uninstalling the
Driver with easy start:
Once the software is completely downloaded, open the Easy
start.
Next tap on the File menu. Then choose the Uninstall Software option from the menu.
Go through the warnings that display, and tap on the
Continue option.
Now enter your user name and password, when prompted.
Here, the Uninstaller will remove all HP Officejet Pro 9012
software previously installed.
HP Officejet Pro 9012 printer
software reinstall
Before you begin with reinstallation, remove all the driver
files.
Generally, you need to visit the manufacturer official site.
Note: Ensure to download the new driver version for your
printer.
Firstly, move to manufacturer official site. And type the
model name.
Here, the screen will show drivers that are available for
the HP Officejet Pro 9012 printer.
Now, you have to select the most compact driver.
Eventually, click on the download option for HP Officejet Pro
9012 Printer driver download.
Once the driver gets downloaded, the window will pop on the
screen.
Now proceed with the HP Officejet
Pro 9012 printer instruction for installing the driver.
