HP Officejet Pro 9026 Network Problem Fix

HP Officejet Pro 9026 Network Problem Fix 

                                          

Troubleshooting

When a connection error message occurs, check if the password is right. The network issues are mainly due to the poor connection or wrong password. Always make use of the prompts to correct the issues. The additional HP Officejet Pro 9026 printer troubleshooting will fix other issues.

HP Officejet Pro 9026 network connection settings:

Proper requirements for network connection

  • Find the information about the network such as SSID and password.
  • The connection should be free from fluctuation. And also, it should connect to the computer already.
  • For configuring the HP Officejet Pro 9026 with the network, you should select the wireless wizard.
  • Before you begin, keep the router near the printer.
  • Network connection settings
  • Search the Wireless icon on the printer control panel. Select the Wireless icon and get the Network Setup option.
  • Then, click on the Wireless Settings and try to Wireless Setup Wizard.
  • Under the Wireless Settings option, you can change the necessary network settings.    

If HP Officejet Pro 9026 printer network connection fails

  • Are you seeking to establish a connection for the printer? If yes, then you can visit this section.
  • Firstly, check any error code on the computer screen. If you find the error, follow the relevant steps.
  • Re-establish the network connection for the device. Before reconnecting, reboot the router once.
  • After rebooting, leave it for a few minutes. With the buffer time, your router will complete the startup.
  • Then, move to the computer to reboot it. Next, close the files after saving them.
  • Afterward, proceed to the computer rebooting.
  • While you reboot the device, your printer should not have any cable connection.
  • Mainly, the device should be free from Ethernet and USB cables.
  • At last, you can call us to find other solutions.  

Disable Firewall Printer Firmware

  • If you notice the warning message on the firewall, disable the firewall.
  • The basic software offered by HP will disable the firewall.
  • Next, download the HP Print and Scan Doctor and install to deactivate the firewall.
  • Once the software is fully downloaded, find the Network option.
  • You need to run the software to search the Network option.
  • Now, click on the Troubleshooting Firewalls section.
  • In the list, the required option will be the second option.
  • After choosing it, disable the Enabled option for all firewalls.
  • Lastly, close the screen and continue to download the drivers.    

Uninstall HP Driver and Software

  • To begin with, switch off the Officejet Pro 9026 device. Next, detach all the cables that run between the devices.
  • Now, find the location of the driver that needs to be removed. For finding the drivers, select the Start option on the device.
  • Then, find out the All Programs option from the Start option.
  • From the listed options, choose the Devices and Printers folder.
  • A list of printers that are in the network will be now listed.
  • At the moment, you need to clear the currently connected printer.
  • If you find more than one driver folder, you can clear all drivers.
  • Click on the Uninstall option to clear the driver folder. 

HP Officejet Pro 9026 printer software reinstall

  • By clearing the printer driver, your computer gets enough place.
  • To begin with, check the drivers listed on our website.
  • Initially, enter the printer model in the driver section.
  • Next, you will get the printer drivers based on the series that you enter.
  • Now, select the drivers from the list and click on the Download.
  • On downloading the driver, it will extract the drivers in the right location.
  • Or else, you can use the installation CD for extracting the drivers of the printer.
  • The CD will have a basic set of drivers that is useful for normal printing.
  • For that, find the CD tray of the printer and load the CD in it.
  • Wait until it recognizes and runs the wizard. If it is not doing so, then you can do it manually.
by at